Warmup’s low-temperature underfloor heating systems are engineered specifically for floating floors — warming timber, engineered wood, and laminate finishes gently without causing expansion, warping, or voiding the floor manufacturer’s warranty.
From our Australian warehouse
Warranty
Before and after install
Warmup’s wood and laminate floor heating uses low-temperature foil-based heating elements specifically designed to warm floating timber, engineered wood, and laminate floors without causing expansion, warping, or adhesive failure. Systems operate within manufacturer-specified surface temperature limits, typically no more than 27°C, with 24°C recommended for optimal performance and running cost efficiency.
The heating element installs between the subfloor and floating floor covering with no wet trades, no tile adhesive, and no significant floor height increase; making the insulation clean and minimally disruptive. The floating floor simply clicks or lays over the top in the standard manner.
Warmup’s technical team confirms compatibility with your specific engineered timber or laminate product before supply. For existing timber or laminate floors, Warmup’s inscreed and inslab heating systems may be considered as part of a broader renovation, with full advice provided on the most appropriate system for your floor type, room, and project scope.
For floating timber, engineered wood, and laminate floor installations, Warmup Australia strongly recommends using a low TOG underlay specifically designed for use with underfloor heating systems. A low TOG underlay allows heat to transfer efficiently through the floor whilst still providing acoustic insulation, moisture protection, and floor support. Using a standard high-insulation underlay can significantly reduce the performance and responsiveness of the heating system.
Warmup commonly recommends the Quick-Step Timber Underlays range, as these products are compatible with electric underfloor heating applications and suitable for most floating floor installations throughout Australia.
Warmup Australia can also supply the recommended low TOG underlay directly as part of your heating package, helping ensure compatibility between the heating system and floor finish whilst simplifying the installation process for builders, installers, and homeowners.
Important Considerations for Timber and Laminate Floor Heating
Heating beneath timber and laminate floors requires the correct product, the correct installation process, and prior confirmation of compatibility with the floor manufacturer. Warmup’s technical team manages this process for every project. The following are the key technical considerations:
Warmup’s low-temperature systems are designed to deliver comfortable warmth beneath timber and laminate floors whilst fully preserving the floor finish and manufacturer’s warranty. Warmup’s technical team will confirm compatibility with your specific floor product, design a system to the correct specification, and support the installation from initial design through to commissioning. Contact the Warmup team on 1800 WARMUP (1800 927 687), [email protected] or get a free quote.
Warmup Foil Heating Mat (for Laminate Floors): Designed for installation beneath carpet and laminate floating floor finishes, this low-profile, foil-based electric heating mat is laid flat on the subfloor surface before the underlay and floor covering are installed. Available in coverage sizes from 0.5m² to 14.0m² to suit rooms of varying dimensions, the system requires no wet trades and causes no significant alteration to floor height.
Features:
A: Yes. Warmup’s low-temperature underfloor heating systems are compatible with most engineered hardwood products. Engineered hardwood’s layered construction provides greater dimensional stability than solid timber, allowing it to accommodate the gentle temperature variation produced by a correctly specified low-temperature heating system. Warmup’s technical team confirms compatibility with the specific floor product before designing or supplying a system.
A: Solid hardwood floors are generally not recommended for use with underfloor heating, as the material is susceptible to significant expansion and contraction in response to temperature change — which can cause gapping, cupping, or structural damage to the floor over time. Engineered hardwood is the appropriate alternative for heated floor applications. Homeowners with existing solid hardwood floors should contact Warmup’s technical team to discuss available options for their specific situation.
A: Most laminate floor manufacturers specify a maximum safe surface temperature for their products — typically 27°C. Provided the heating system does not exceed this limit, laminate warranties are generally maintained. Warmup’s low-temperature systems are specifically designed to operate within this threshold and include a thermostat with a floor sensor to enforce the limit continuously. Compatibility with the specific floor product and its warranty conditions should always be confirmed with the floor manufacturer prior to installation.
A: Yes. A thermostat with a floor sensor is mandatory for all timber and laminate floor heating installations. The floor sensor monitors the surface temperature in real time and prevents the heating system from exceeding the floor manufacturer’s specified safe limit. All Warmup thermostats include a floor sensor input as standard, and Warmup’s technical team specifies the appropriate thermostat model as part of every system design.
A: Timber and laminate floor heating systems typically reach an effective operating temperature within 2 to 6 hours of switch-on. This is longer than undertile systems due to the insulating properties of the floating floor covering. Using a programmable or smart thermostat to pre-heat the floor ahead of peak use periods — overnight or in the early morning — ensures the floor is at a comfortable temperature when required without the need for continuous operation.
